Lionel trains, MTH trains, K-Line, other toy trains at Trainz.com

Home > Trains-O Modern > Electronics and Wiring

FEATURED PRODUCTS

MTH 50-1008 Rechargeable Proto-Sound Battery
$11.69
Was $11.95
Save 2%
While quantities last

MTH 50-1019 Proto-Sound 2.0 Battery Charger
$14.79
Was $14.95
Save 1%
While quantities last

MTH 50-1024 ProtoSound Battery
$11.79
Was $11.95
Save 1%
While quantities last

There are 67 results

Sort By:

Results Page:

	Atlas 317 50 Ft. Green Layout Hookup Wire This is an Atlas 317 Green Layout Wire Spool. This spool includes 50 feet of 20 gauge stranded wire.	$8.09 Was $9.95 Save 18% While quantities last

	Atlas 318 50 Ft. Yellow Layout Hookup Wire This is an Atlas Yellow Layout Wire Reel. This reel has 50 feet of 20 gauge stranded wire.	$8.29 Was $9.95 Save 16% While quantities last

	Atlas 319 50 Ft. Light Blue Layout Hookup Wire This is an Atlas 319 Light Blue Wire Reel. This reel is 20 gauge, standard and contains 50 feet of wire.	$8.49 Was $9.95 Save 14% While quantities last

	Atlas 56 Switch Control Box This is an Atlas 56 Switch Control Box.	$2.99

	Atlas 56 Switch Control Box The Atlas Switch Control Box is an electrical switch that controls the setting of remote switch machines by a momentary burst of power. Merely slide the button to the position desired and depress briefly. It is designed to be connected to other #56 switches using the screw terminals and spades on their sides. Includes printed instructions on the reverse side of the package.	$4.59 Was $5.50 Save 16% While quantities last

	Atlas 6924 O Gauge Switch Non-derailing Relay Circuit Board This relay circuit board is fully compatible with TMCC, DCS, DCC, and standard AC/DC control systems, features electronic non-derailing, power routing of closure rails, and it interfaces with the Atlas O 21st Century Signal System. Use this circuit board to add non-derailing functionality to your Atlas and other switches using sensor inputs and also control signals at the same time. Each circuit board can control up to 4 separate switches.	$24.39 Was $24.95 Save 2% While quantities last

	Atlas 6937 7 Foot Signal System Wire This is an Atlas 6937 7 Foot Signal System Wire. This wire is for 3-rail and 2-rail signal operation. It can be used with items such as the Realistic Road Signal 4-Pack. This wire features 6 pin modular connectors.	$5.29 Was $5.50 Save 3% While quantities last

	Atlas 6938 15 Foot Signal System Cable This is an Atlas 6938 15 Foot Signal System Cable. This is for 3-rail and 2-rail signal operation. This can be used with items such as the Realistic Road Signal 4-pack. This includes 6 pin modular connectors.	$10.25

	Atlas 6939 25 Foot Signal System Wire This is an Atlas 6939 25 foot Signal System Wire. This is for 3-rail and 2-rail signal operation. This wire can be used with items such as the Realistic Road Signal 4-pack. This includes 6 pin modular connectors.	$14.79 Was $15.50 Save 4% While quantities last

	Atlas CB Switch Control Box This is an Atlas CB Switch Control Box.	$2.99

	Bachmann 246 Digital True Blast Steam Sound Unit This is a Bachmann 246 Digital True Blast Steam Sound Unit. Road Name: Product Information •whistle and ringing bell •installation instructions included •board dimensions: L = 1 1/2 ", W = 1 3/16", H = 1 1/8" •speaker with sound enhancer dimensions: D = 2", H = 1 1/8"	$41.99 Was $54.95 Save 23% While quantities last

	Busch 4280 Building lights 14-16V 2/ This is a Busch 4280 Building Lighting Kit.	$3.69 Was $3.99 Save 7% While quantities last

	Circuitron 800-5102 Alternating Flasher Circuit Board This circuit board isused to make LED's or miniature lamps alternately flash in crossbuck signals or highway flashers at a constant rate. Input voltage can be 10-18V AC or DC and the output is 250 ma. Connect the input to any type of detection unit. The ciruit board is 1.5 inches x 3 inches. You can use this with Lionel Insulated rail trips or a 145C contactor to operate 154 type Highway Flashers. Complete, detailed, step by step instructions are included.	$16.49

	Gargraves 930B-12 Pig Tail w/ Pin (12) Here is a Pack of 12 Gargraves 930B-12 Pig Tails with Pins for your O Scale track. These are 16 AWG pigtail connectors for power feed conncections, and are for use on your O Scale track.	$10.99 Was $12.95 Save 15% While quantities last

	Light Works 2702 Chase Power Supply This is a # 2702 Chase power supply. The input voltage for this is 1.5V DC. This can be provided by (3) 1.5V AAA or similar batteries. You can get a battery holder at Radio Shack for this or use a Light Works #4802 or 4803 1.5VDC power supply.	$14.19

	Lionel 6-16886 Legacy Command Upgrade Module Pack NIB This is a 6-16886 Legacy Command Upgrade Module Pack.	$16.99 Was $18.00 Save 5% While quantities last

	Micro Structures 719 Fluorescent Mounting Kit This mounting kit for one fluorescent lamp. Simplifies installation of lamps.	$2.50

	Miniatronics 10000101 Roof Top Beacon Amber Use this flasher on top of your diesel, roadway warning lights, tower signals, emergency vehicles, etc. The amber L.E.D. (3mm) mimics a real flashing light. If you choose to use this product as a rooftop beacon, we have included a lens cap that will diffuse the light. Simply drill an 11/64 hole, the lens cap will snap into the hole, and the L.E.D. will snap into the lens.	$13.59 Was $13.95 Save 2% While quantities last

	Miniatronics 10031101 Yeloglo Headlight 3mm A small PC board makes installation easy for replacing your old headlight. Now you can have your engine light look like the real thing. This light emulates the look of an incandescent light, no need to worry how to wire an LED. Only 2 wires to hook up. Board measures 5/16” X 5/8” X 1/8”.	$16.45

	Miniatronics 10031201 Yeloglo Headlight 5mm A small PC board makes installation easy for replacing your old headlight. Now you can have your engine light look like the real thing. This light emulates the look of an incandescent light, no need to worry how to wire an LED. Only 2 wires to hook up. Board measures 5/16” X 5/8” X 1/8”.	$15.09 Was $16.45 Save 8% While quantities last

	Miniatronics 10050102 Assorted Flashing Light Bars True to scale, each bar has 8 LED’s in groups of 2, plus a dome. Finally, you can easily add authenticity to police and emergency vehicles in your diorama. All units are fully assembled and they come with instructions for mounting in a police car, fire truck or emergency vehicle. They operate on 9VDC, batteries are not included, and battery snaps are included. There are two units of the same color in each package. In addition we have included 2 latching push button switches.	$20.29 Was $20.95 Save 3% While quantities last

	Miniatronics 10070101 Headlights/Tailights Control the scene! Just as the real unmarked police car, this unit will be on constant and when the need arises it can be made to flash. Easy to use, fully assembled unit. Simply mount the Yeloglo LED’s for the headlights, Red LED’s for taillights, and Blue LED’s in the grill. Push one of the latching buttons and all come on constant. Push the second latching push button switch and the lights flash on/off, push the first button again and the lights return to constant. All of this accomplished using a ½ PC board. Unit operates off of 4 ½ VDC; triple AAA battery holder included, batteries are not included.	$29.95

	Miniatronics 1008NS01 Adjustable 8 Position Strobe Light White Rapid sequencing of our famous incandescent lamps creates a very bright pulsing strobe effect. Depending on your use of this strobe board the speed rate can be adjusted from a slow strobing to a very fast strobing sequence. Choose from the five different light configurations. These can be used as a sweep of lights on emergency vehicles, road barricade lights or as a string of lights for an amusement park. The blue and white eight position strobe lights can also be used for end of runway airport-landing lights. The red and yellow lights can be used as emergency backlights of an ambulance, or any emergency vehicle. These units are good for HO, N, and O scale and operate on 9-15 VAC or VDC.	$35.99 Was $38.95 Save 7% While quantities last

	Miniatronics 100AAB01 Adjustable Alternating Strobe Blue Answering the requests of hobbyists our engineers designed an adjustable strobe. You can now control the rate of speed of the strobes. One of the adjustable strobes uses an alternating strobing of two lights, all at the rate of speed you choose. These strobe boards have the incandescent bulbs attached. Choose the color for your scene. PC Board measures 1 3/8 X 1/2 X 1/8. Operate on 9-14 volts AC/DC.	$23.09 Was $23.45 Save 1% While quantities last

Results Page: